There are many kinds of ceramic tiles, and the com

2022-07-22
  • Detail

Although there are small types of ceramic tiles, it is the essence to combine performance and use. As the highlight of decoration procurement, the choice of ceramic tiles is a college question. There are many kinds of ceramic tiles on the market, and the owners who choose which kind of ceramic tiles to decorate for the first time are often confused. Experts pointed out that only by understanding ceramic tiles can we choose them well

although there are small types of ceramic tiles, it is the essence to combine performance and use. As the highlight of decoration procurement, the choice of ceramic tiles is a university question. There are many kinds of ceramic tiles on the market, and it is often unclear to choose what kind of ceramic tiles to decorate for the first time. Experts pointed out that only by understanding ceramic tiles can we choose them well

Langhua shower room hoger hardware

different types of ceramic tiles have different uses

at present, there are a dazzling variety of ceramic tiles on the market. When choosing a tile, you might as well have an understanding of the whole picture of the tile first

glazed tiles: tiles with glazed surface are most commonly used in daily life

full body brick: the surface is not glazed, and the material and color of the front and back sides are consistent, with good skid resistance and wear resistance

polished brick: the whole brick is made by grinding and polishing. Its surface is bright and clean, high hardness, and very wear-resistant

vitrified brick: after polishing, the surface is as smooth and transparent as a glass mirror. It is the hardest kind of ceramic tile

mosaic: generally, a large brick is composed of dozens of small bricks, which is acid and alkali resistant, impermeable and not easy to break

interior wall tiles: ceramic materials used for indoor walls

floor tiles: ceramic products used for the ground

square bricks: ceramic products used in outdoor large squares, sidewalks and other occasions

ceramic brick: refers to the water absorption of ceramics ≥ 6% of ceramic products are mainly used for wall decoration

half ceramic and half ceramic tile: refers to the water absorption of ceramics ≥ 3% and < 6% of ceramic products

full ceramic tile: refers to the water absorption of ceramics < 3% of the ceramic products can be widely used in the decoration of walls and floors

how to choose ceramic tiles, insiders pointed out that we can start from the following four aspects:

see: whether the appearance of ceramic tiles is straight. Check whether there are spots, cracks, bumps, corrugations, peeling, lack of glaze and other problems on the surface of the ceramic tile, and whether the size is consistent. Look at the colors and patterns of the tiles. Good product colors and patterns are delicate and lifelike, while poor quality ceramic tile colors and patterns will be lack of color, broken lines, dislocation and so on

listen: listen to the timbre of the tiles. The method is to hold the edge of the brick in one hand and tap the brick with the other hand. The sound of good brick is clear and loud, while the sound of bad brick is low and stuffy

ratio: see the hardness of ceramic tiles. To put it bluntly, if you hold bricks of the same specification in your hand, the heavier the brick, the higher its density and hardness. Compare whether the size of bricks is consistent, and the deviation of small bricks is allowed to be ± 1 mm, large bricks are allowed in ± 2 mm

try: look at the water absorption on the back of the ceramic tile. Turn over the tiles and drop some water on the back. The slower the penetration, the denser the texture and the better the internal quality

the base course should be cleaned before tiling. If there is lime paste, emulsion paint, wallpaper, etc. on the wall, or there is dirt on the ground, it must be cleaned, otherwise the cement mortar will not bond firmly with the base course; In addition, if there are cracks in the wall itself, it should be properly handled before tiling, so as to prevent the cracks in the basic structure from becoming larger in the future, resulting in the cracking or falling off of the wall tiles; For the ground and wall with too large difference in flatness or verticality, cement mortar shall be used for leveling

the floor tiles should be pasted from the inside out. If there is a slope or floor drain on the ground, pay attention to slope according to the drainage direction; The wall tiles should be paved from bottom to top. For the sake of beauty, the tiles at the bottom should be pasted later. Press the floor tiles after the wall tiles are pasted. If there is half a brick, try to put it below. In addition, one wall cannot be pasted to the top at one time to prevent the tile from collapsing due to its heavy self weight

wall tiles have high moisture content. Before tiling, the base course should be fully watered and wetted, and the tiles should also be soaked in water for at least 20 minutes before use. Otherwise, the moisture in the mortar will be quickly absorbed by the dry base course and ceramic tiles and set rapidly, which will affect its bonding fastness. Wall tiles will also absorb water from the cement, making the cement unable to act as an adhesive. In addition, the water absorption of each brand of wall tiles is also different, which depends on experience

there are many varieties and specifications of ceramic tiles, and the physical and chemical properties of various products are also different. The effects of choosing different products are also very different. Therefore, when purchasing and using, we must consider comprehensively in combination with our own actual situation, and avoid the following consumption misunderstandings:

misunderstandings 1: the thicker the ceramic tile, the better

the quality of the ceramic tile does not lie in its thickness, but in its own texture

Myth 2: matte bricks are not easy to clean

most of the glaze layers on the surface of matte bricks have been specially treated, which are wear-resistant, non slip, non dirt absorbing, easy to clean and so on

myth 3: the larger the specification of floor tiles, the better.

when choosing the specification of ceramic tiles, we must consider the size of the actual space. Living room floor tiles also have to consider the size of the actual visible area, which refers to the size of the area that can be seen by future generations when furniture is placed

myth 4: seamless tiles should be pasted without seams

considering the thermal expansion and cold contraction of tiles, seamless wall tiles must have seams, which should be about 1~1.5mm, or take the size of air nails as a reference

small pieces of tiled tiles achieve a cool bathroom in the morning and night. Taking a shower in the cool bathroom space to relieve heat is scheduled for the midsummer season. Although tiling the bathroom wall is the most common decorative technique, in order to make the narrow bathroom space have a cool and modern bathing effect, we must choose small tiles to create a seasonal and fashionable effect and create a comfortable feeling that the cool feeling does not dissipate

choose bathroom furniture with good waterproof performance. Because you prefer a spacious feeling, there is no partition wall of dry and wet partitions in the whole bathroom, and there is no shower curtain installed in the shower area. Therefore, in order to prevent splashing, you must arrange the storage space in the place where the spray in the shower area cannot splash. You can also consider arranging the storage space on the wall, such as installing stainless steel shelves, etc. In addition, stainless steel legs that are not afraid of water can also be used as support under the basin, or bathroom cabinets with good waterproof performance can be used

佛山男科医院

秦皇岛男科医院

厦门男科医院

济南肿瘤医院

Copyright © 2011 JIN SHI